Samsung SCX-8240NA-CAS - Manual (Page 118)

Faxing (optional)_ 118
Selecting a received fax output tray
This option allows you to specify the tray where the fax will be printed.
1. Press Machine Setup > Application Setting > Fax Settings >
Received Fax Printing > Output Tray from the display screen.
2. Press the appropriate tray.
• The Finishing Tray and Top Tray are available only when the
optional standard finisher or booklet finisher is installed.
• When the optional standard finisher or booklet finisher is
installed, Center Tray is inactivated.
3. Press OK.
Printing received faxes on both sides of the paper
Set this duplex feature to save paper. When the machine prints the received
fax data, it prints them on both sides of the paper.
1. Press Machine Setup > Application Setting > Fax Settings >
Received Fax Printing > Duplex from the display screen.
2. Press appropriate option.
• Off: Prints only one side of the paper.
• Long Edge: Prints both sides of the paper; however, the binding will
be the long edge.
• Short Edge: Prints both sides of the paper; however, the binding
will be the short edge.
3. Press OK.
Receiving faxes in memory
Since your machine is a multi-tasking device, it can receive faxes while you
are making copies or printing. If you receive a fax while you are copying or
printing, your machine stores incoming faxes in its memory. Then, as soon
as you finish copying or printing, the machine automatically prints the fax.