Samsung SCX-8240NA-CAS - Manual (Page 149)

Printing_ 149
Setting Device Options
When you install the optional devices such as optional dual cassette feeder,
standard finisher, etc, this machine automatically detects and sets the
optional devices. If you cannot use the optional devices you installed in this
driver, you can set the optional devices in Device Options. Job Accounting
allows you to print with the given permission.
1. Click the Windows Start menu.
2. For Windows 2000, select Settings > Printers.
• For Windows XP/2003, select Printers and Faxes.
• For Windows 2008/Vista, select Control Panel > Hardware and
Sound > Printers.
• For Windows 7, select Control Panel > Hardware and Sound >
Devices and Printers.
• For Windows Server 2008 R2, select Control Panel > Hardware >
Devices and Printers.
3. Right-click your machine.
4. For Windows XP/2003/2008/Vista, press Properties.
• For PS driver, select PS driver and right-click to open Properties.
For Windows 7 and Windows Server 2008 R2, from context menus,
select the Printer properties.
If Printer properties item has ► mark, you can select other
printer drivers connected with selected printer.
5. Select Device Options.
The Properties window may differ depending on the driver or
operating system you are using.
6. Select the appropriate option.
• Tray Options: Select the optional tray you installed. You can select
the Tray 3,4 (dual cassette feeder) or High Capacity (high capacity
feeder). Also, you can see the tray information, and set the paper
size and type in Advanced. If you select Reset, settings in the
Advanced returns to the default setting.
• Finisher Options: Select the optional finisher you installed. You
can select the Standard Finisher (1K) or Booklet Finisher (3K).
• Storage Options: Select the memory capacity which is installed in
the machine. This option is available only when you use the PS
printer driver.
• Hole Punch Options: This option is available only when you set
Finisher Options. Select the optional punch kit you installed. You
can select the 2/3 Hole or 2/4 Hole.
The available punch kit may differ from country to country.
Contact your local Samsung dealer or the retailer where you
purchased your machine.
• Advanced: Select one of the options. This option is available only
when you use the PS printer driver.
- Output Protocol: Specifies the protocol of the printer will use for
print jobs.
When you click ASCII, data is sent in ASCII format (7-bit), which
may take longer to print but can be sent through any I/O channel,
such as a serial, parallel, or network port. When you click Binary
(Binary Communications Protocol) or TBCP (Tagged Binary
Communications Protocol), all data except special control
characters is sent in binary (8-bit) format. The binary formats can
be sent over parallel or serial communications ports and are
faster than sending data in ASCII format.
- Available PostScript Memory: Specifies the amount of
available PostScript memory. It is a subset of the printer's total
physical memory. It is usually the best to use the default setting,
which is determined by your printer manufacturer.
- Convert Gray Text to PostScript Gray: Specifies whether to
convert the true gray (RGB value) in text to the gray provided by
the PostScript driver.
- Convert Gray Graphics to PostScript Gray: Specifies
whether to convert the true gray (RGB value) in graphics to the
gray provided by the PostScript driver.
- Add Euro Currency Symbol to PostScript Fonts: Specifies
whether to augment the device fonts with the Euro character.
- Job Timeout: Specifies how long the document can take to get
from the computer to the printer before the printer stops trying to
print the document. If you specify 0, the printer will continue
trying to print indefinitely.
- Wait Timeout: Specifies how long the printer will wait to get
more PostScript information from the computer. After the
specified time passes, the printer stops trying to print the
document and prints an error message. If you are trying to print a
very complicated document, you may want to increase this value.
If you specify 0, the printer will wait indefinitely.
- Minimum Font Size: Specifies the minimum font size (in pixels)
for which the PostScript driver will download TrueType fonts as
outline (Type 1) fonts. A font smaller than the minimum setting
will be downloaded as a bitmap (Type 3) font.
This option lets you fine-tune the Automatic setting for the
Advanced Font/Text Options (see "Advanced" on page 143).
- Maximum Font Size: Specifies the maximum font size (in
pixels) for which the PostScript driver will download TrueType