Samsung SCX-8240NA-CAS - Manual (Page 154)

Printing_ 154
5. In the Save As window, type a name up to eight characters in the
File name box. Select the destination path, if necessary (The default
is C:\Formover).
6. Click Save. The name appears on the Overlay List.
7. Click OK or Print until you exit the Print window.
8. The file is not printed. Instead, it is stored on your computer hard disk
drive.
The overlay document size must be the same as the document
you print with the overlay. Do not create an overlay with a
watermark.
Using a page overlay
After an overlay has been created, it is ready to be printed with your
document. To print an overlay with a document:
1. Create or open the document you want to print.
2. To change the print settings from your software application, access
Printing Preferences (see "Opening printing preferences" on
page 140).
3. Click the Advanced tab.
4. Select the desired overlay from the Text drop-down list.
5. If the overlay file you want does not appear in theText drop-down
list, select Edit from the list and click Load. Select the overlay file
you want to use.
If you have stored the overlay file you want to use in an external
source, you can also load the file when you access the Load
window.
After you select the file, click Open. The file appears in the Overlay
List box and is available for printing. Select the overlay from the
Overlay List box.
6. If necessary, check Confirm Page Overlay When Printing box. If
this box is checked, a message window appears each time you
submit a document for printing, asking you to confirm your wish to
print an overlay on your document.
If this box is not checked and an overlay has been selected, the
overlay automatically prints with your document.
7. Click OK or Print until you exit the Print window.
The selected overlay prints on your document.
The resolution of the overlay document must be the same as that
of the document you will print with the overlay.
Deleting a page overlay
You can delete page overlays that you no longer use.
1. In the Printing Preferences window, click the Advanced tab.
2. Select Edit in the Text drop down list.
3. Select the overlay you want to delete from the Overlay List box.
4. Click Delete.
5. When a confirming message window appears, click Yes.
6. Click OK or Print until you exit the Print window.
Banner Printing
Machine Setup
1. Access the Tray setting to set the paper size in MP tray(see “Tray
setting” on page 46).
2. Click arrows to adjust paper size.
Paper handling ranges from 98 to 320 mm width (3.87 to 12.6
inches) and from 148 to 1,200 mm length (5.8 to 47.3 inches).
Printer driver setting
1. Access the Paper tab to set the paper size in MP tray (see “Paper
Options” on page 168).
2. Select Edit from the Original Size drop-down list.
3. Enter Custom Name and paper size to add Custom Paper List,
then click OK.
4. Select Same as Original Size from the Output Size drop-down list.
5. Select MP tray from the Source drop-down list, then OK.