Samsung SCX-8240NA-CAS - Manual (Page 89)

Scanning_ 89
Scanning and sending to SMB/WEBDAV/FTP server
You can select up to four destinations using SMB, WEBDAV, or FTP
servers.
1. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 35).
2. Press Scan to Server from the display screen
3. Set the scan features in the Advanced, Image, or Output tabs (see
"Changing the scan feature settings" on page 96).
4. Press the Basic tab.
5. Press the server name input area, you can enter a recipient’s server
address manually. You cannot enter address in the 2 before entering
address in the 1(see "Entering server addresses manually" on page 90).
You can also use Address Book to enter the addresses easily (see
"Entering server addresses from the address book" on page 89).
6. Set the scan quality by Duplex and Resolution (see "Scanning from
both sides of originals" on page 96 and "Changing the resolution" on
page 96).
7. Press Start on the control panel.
The machine begins scanning and then sends the scanned image to the
specified server.
If an original is placed on the scanner glass, the machine shows the
window asking if you want to place another page. Load another original
and press Yes. When you finish, press No on this window.
• To cancel the current scan job, press Stop on the control panel. Or
you can delete current and pending jobs using Job Status on the
control panel. Select the job you want to cancel and press Delete
(see "Job Status button" on page 30).
• While the machine is sending a scanned data, you cannot use the
machine to copy or to send a fax.
Entering server addresses
Once you have stored the frequently used addresses into the address book
(see "Setting up an address book" on page 128), you can enter server
addresses singly or you can enter server addresses directly using +Add.
Entering server addresses from the address book
1. Press Scan to Server from the display screen.
2. Press Address Book.
3. Press the Search input area. Then the pop-up keyboard appears.
4. Enter the first alphabet or full server name you are looking for.
Then press Ok.
5. Press Search.
When searching is completed, the screen displays the search
results.
6. Press the server name you want from the search results and press
Ok.
Press the delete icon( ) to delete a server address entered.