Samsung SCX-8240NA-CAS - Manual (Page 152)

Printing_ 152
or mark).
6. Click OK or Print until you exit the Print window.
Printing on both sides of the paper
You can print on both sides of a paper; duplex. Before printing, decide how
you want your document oriented. You can only use this feature with Letter,
Legal, Oficio, US Folio, A4, ISO B5, JIS B5, Statement, Executive, A5, 8K,
16K, Ledger, Tabloid Extra, A3 or JIS B4 sized paper.
• When you use this feature with the Right Tray as an output tray
(see "Output Tray Options" on page 145), it could slow down the
printing speed. We recommend you to use other trays for an
output tray.
• Do not print on both sides of the special media, such as labels,
envelopes, or thick paper to print on both sides of paper. It may
cause a paper jam or damage the machine.
1. To change the print settings from your software application, access
Printing Preferences (see "Opening printing preferences" on
page 140).
2. Click the Basic tab.
3. From the Double-Sided Printing section, select the binding option you
want.
• Printer Default: If you select this option, this feature is determined
by the setting you’ve made on the control panel of the machine. This
option is available only when you use the PCL printer driver.
• None: Disables this feature.
• Long Edge: This option is the conventional layout used in
bookbinding.
• Short Edge: This option is the conventional layout used in
calendars.
• Reverse Double-Sided Printing: Check this option to reverse the
print order when duplex printing.
4. Click the Paper tab, select the Original size, Source, and Type.
5. Click OK or Print until you exit the Print window.
Change the size by percentage of your document
You can change the size of a document to appear larger or smaller on the
printed page by typing in a percentage you want.
1. To change the print settings from your software application, access
Printing Preferences (see "Opening printing preferences" on
page 140).
2. Click the Paper tab.
3. Select actual paper size of the originals from the Original Size.
4. Enter the scaling rate in the Percentage input box.
You can also click the up/down arrows to select the scaling rate.
You cannot use this feature when you select a size of paper from
the Output Size.
5. Select the Source and Type.
6. Click OK or Print until you exit the Print window.
Fitting your document to a selected paper size
This printer feature allows you to scale your print job to any selected paper
size regardless of the document size. This option can be useful when you
want to check fine details on a small document.
1. To change the print settings from your software application, access
Printing Preferences (see "Opening printing preferences" on
page 140).
2. Click the Paper tab.
3. Select actual paper size of the originals from the Original Size.
4. Select the size of paper to be printed in the tray from the Output Size.
5. Select the Source and Type.
6. Click OK or Print until you exit the Print window.
Using watermarks
The watermark option allows you to print text over an existing document.
For example, you use it when you want to have large gray letters reading
“DRAFT” or “CONFIDENTIAL” printed diagonally across the first page or all
pages of a document.
There are several predefined watermarks that come with the machine. They
can be modified, or you can add new ones to the list.
8
9