Stamp, Stamp" on – Samsung SCX-8240NA-CAS User Manual
Page 72
Copying_ 72
to all copies. Contact your administrator.
•
Off: Disables this feature.
•
On: This feature can be used.
•
New: Makes a new overlay form. This option is available only when
you place originals on the scanner glass.
•
Detail: Displays information of the selected overlay form. You can
preview and print the stored overlay form.
•
Edit: Changes the name of the selected overlay form.
•
Delete: Deletes the selected overlay form.
•
Overlap: You can select the overlap option for applying the overlay.
-
Front: The overlay will be printed in front of the text. Some text
might not be shown under the overlay.
-
Back: The overlay will be printed behind the text.
-
Transparent: The overlay will be applied transparently.
6. Select a overlay form from the list and press OK from the display screen.
7. Press Start on the control panel to begin copying.
Stamp
Prints the date and time, page number, or user ID on printouts.
When you use this option, Booklet and Poster in in the Advanced
tab is inactivated.
1. Press Copy from the display screen.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
3. Adjust the settings for each copy such as Paper Supply,
Reduce/Enlarge, Duplex and more in the Basic tab (see "Changing the
settings for each copy" on page 54).
4. Press the Advanced tab > Stamp from the display screen.
5. Press the appropriate option.
•
Page Number: This option allows you to print page numbers on the
printouts.
•
Time & Date: This option allows you to print time and date stamps
on the printouts.
•
User ID: This option allows you to print a user ID on the printouts.
•
IP Address: This option allows you to print a IP Address on the
printouts.
6. Press On to use the selected option.
7. Set the Stamp settings.
•
Pages: Select to print the option on all pages or only the first page.
•
Position: Select the printed position of the text.
•
Text: Select the text color and size.
8. Press OK from the display screen.
9. Press Start on the control panel to begin copying.