Samsung SCX-8240NA-CAS - Manual (Page 119)

Faxing (optional)_ 119
Adjusting the document settings
Before sending a fax, you can adjust the document settings, such as
resolution, darkness, color, duplex and so on. Refer to explanation of this
section.
The document setting herein is for the current job only. If you want to
change the default settings on document settings, refer to Machine
Setup > Application Setting > Fax Settings > Default Value.
Selecting the size of originals
A fax can be sent after specifying the original document size if the original
document size cannot be detected automatically or if you wish to specify a
certain document size.
1. Press the Advanced tab > Original Size from the display screen..
2. Press the appropriate option.
You can change the paper list on the display screen pressing inch
Size or mm Size. The paper list is divided into the available A/B
size type and letter size type paper in this machine.
• Auto: Automatically detects the size of originals, but this option
supports only when originals are Letter, Ledger, Legal, Statement,
A3, A4, A5, B4, or JIS B5-sized.
• Other preset values: Allows you to easily select values commonly
used.
3. Press OK from the display screen.
Faxing on both sides of originals
This function is especially intended for two-sided originals. You can select
whether the machine sends the fax on one side or both sides of the paper.
1. Press the Advanced tab > Duplex, then set the original orientation.
2. Press the appropriate option.
• 1 Sided: For originals that are printed on one side only.
• 2 Sided, Book: For originals that are printed on both sides.
• 2 Sided, Calendar: For originals that are printed on both sides, but
the back is rotated 180 degrees.
To use 2 Sided, Book and 2 Sided, Calendar, load the originals
on the DADF. If the machine cannot detect the original on the
DADF, it automatically changes the option to 1 Sided.
3. Press OK from the display screen.