Samsung SCX-8240NA-CAS - Manual (Page 36)

Media and tray_ 36
In the duplex automatic document feeder (DADF)
Preparing originals
• Do not load paper smaller than 140 x 140 mm (5.5 x 5.5 inches) or
larger than 297 x 432 mm (11.7 x 17 inches).
• The DADF can automatically detects Statement LEF, Statement
SEF, JIS B5 LEF, JIS B5 SEF, A5 LEF, A5 SEF, A4 LEF, A4 SEF,
Letter LEF, Letter SEF, B4, Ledger, Legal, and A3-sized originals.
• Do not attempt to load the following types of paper, in order to
prevent paper jam, low print quality, and machine damage.
- Carbon-paper or carbon-backed paper
- Coated paper
- Onion skin or thin paper
- Wrinkled or creased paper
- Curled or rolled paper
- Torn paper
• Remove all staples and paper clips before loading.
• Make sure any glue, ink, or correction fluid on the paper is
completely dry before loading.
• Do not load originals that include different sizes or weights of paper.
• Do not load booklets, pamphlets, transparencies, or documents with
other unusual characteristics.
Using the DADF, you can load up to 100 sheets of paper (80 g/m 2 , 20 lb
bond) for one job.
1. Flex or fan the edge of the paper stack to separate the pages before
loading originals.
2. Load the originals face up into the DADF. Make sure that the bottom
of the original stack matches the paper size marked on the document
input tray.
3. Adjust the document width guides to the paper size.
Dust on the DADF glass may cause black lines on the printout.
Always keep the glass clean.