Do a thorough visual inspection – Actron Digital Multimeter CP7676 User Manual

Page 3

Advertising
background image

Vehicle Service Manual – Sources For Service Information

The following is a list of sources to obtain vehicle service information for your specific vehicle.

• Contact your local Automotive Dealership Parts Department.

• Contact local retail auto parts stores for aftermarket vehicle service information.

• Contact your local library. Libraries often allow you to check-out automotive service manuals.

Do a Thorough Visual Inspection

Do a thorough visual and “hands-on” underhood inspection before starting any diagnostic

procedure! You can find the cause of many problems by just looking, thereby saving yourself a lot

of time.

• Has the vehicle been serviced recently? Sometimes things get reconnected in the wrong place,

or not at all.

• Don’t take shortcuts. Inspect hoses and wiring which may be difficult to see due to location.

• Inspect the air cleaner and ductwork for defects.

• Check sensors and actuators for damage.

• Inspect ignition wires for:

- Damaged terminals.

- Split or cracked spark plug boots

- Splits, cuts or breaks in the ignition wires and insulation.

• Inspect all vacuum hoses for:

- Correct routing. Refer to vehicle service manual, or Vehicle Emission Control

Information(VECI) decal located in the engine compartment.

- Pinches and kinks.

- Splits, cuts or breaks.

• Inspect wiring for:

- Contact with sharp edges.

- Contact with hot surfaces, such as exhaust manifolds.

- Pinched, burned or chafed insulation.

- Proper routing and connections.

• Check electrical connectors for:

- Corrosion on pins.

- Bent or damaged pins.

- Contacts not properly seated in housing.

- Bad wire crimps to terminals.

3

Advertising
This manual is related to the following products: