Myron L PS9TK - Manual (Page 50)

46
3. Then press the key. “Pc On” will be displayed (see Figure
25).
nOTE: “Pc ini” may momentarily be displayed while initializing (see
Figure 26).
4. Add bluDock to your Bluetooth devices per your operating
system procedure. ThE bLuDOcK DEvicE PaSSKEy iS
1234.
5. After pairing, note the number of the COM port assigned by
the computer. In Windows XP, note the number of the outgoing
COM port assigned by the computer.
nOTE: The PS9 will automatically power down after 60 sec. If
the PS9 powers down during pairing, repeat steps 1-3 above and
continue.
C. Memory Stack Download
1. With the P
OOL
P
RO
in “Pc On” mode, open the U2CI software
application.
2. Verify that the port selected matches the COM port number
Figure 26
Figure 25
Figure 24