3c. specification chart, D. warranty/service the myron l p, Model p – Myron L PS9TK User Manual

Page 7: Model ps9

Advertising
background image

3

C. Specification Chart

Parameters

Ranges

Resolution

accuracy

auto

Temperature

compensation

adjustable

Temperature

compensation

cond/TDS

Ratios Pre-

programmed

Conductivity

0-9999µS/cm

10-200mS/cm

in 5 autoranges

0.01(<100µS)

0.1(<1000µS)

1.0(<10mS)

0.01(<100mS)

0.1(<200mS)

±1% of

reading

0-71ºC

32-160ºF

0-9.99%/ºC

KCl, NaCl,

442™

TDS

0-9999ppm

10-200ppt

in 5 autoranges

0.01(<100ppm)

0.1(<1000ppm)

1.0(<10ppt)

0.01(<100ppt)

0.1(<200ppt)

±1% of

reading

0-71ºC

32-160ºF

0-9.99%/ºC

MIN/SALT*

0-9999ppm

10-200ppt

in 5 autoranges

0.01(<100ppm)

0.1(<1000ppm)

1.0(<10ppt)

0.01(<100ppt)

0.1(<200ppt)

±1% of

reading

0-71ºC

32-160ºF

0-9.99%/ºC

pH

0-14pH

±.01pH

±.01pH

**

0-71ºC

32-160ºF

ORP

±999mV

±1mV

±1mV

**

Free

Chlorine

(FC

E

)

0.00-9.99ppm***

0.01ppm

±0.3ppm

<1.00ppm

**

±0.2ppm

≥1.00ppm

**

0-71ºC

32-160ºF

350≤ORPmV<725

and 0.0≤pH<9.9

725≤ORPmV<825

and 0.0≤pH<8.9

Alkalinity Titration

10-800ppm

0.1(<100 ppm)

1(<800 ppm)

Hardness Titration

0-1710ppm

(0-100 grains)

0.1(<100 ppm)

1(<1710 ppm)

LSI Titration

-10 to +10

0.1

Temperature

0-71ºC

32-160ºF

0.1ºC/F

±0.1ºC

* NaCl — Sodium chloride **±.2 pH in the presence of RF fields ≥ 3 V/m and > 300 MHz

***If either ORP or pH is outside the specified limits, the instrument will display "-Or-".

D. Warranty/Service

The Myron L P

OOL

P

RO

, excluding the pH/ORP sensor, has a Two (2)

Year Limited Warranty. The pH/ORP sensor has a Six (6) Month Limited

Warranty for materials and workmanship. If an instrument fails to operate

properly, see Troubleshooting Chart, pgs. 50-51. The battery, pH/ORP

sensor and cell extender are user-replaceable. For other service, return

the instrument prepaid to the Myron L Company.

MyROn L cOMPany

2450 impala Drive

carlsbad, ca 92010-7226 uSa

+1-760-438-2021

E-Mail: [email protected]

[email protected]

www.myronl.com

If, in the opinion of the factory, failure was due to materials or workmanship,

repair or replacement will be made without charge. A reasonable service

charge will be made for diagnosis or repairs due to normal wear, abuse

or tampering. This warranty is limited to the repair or replacement of the

P

OOL

P

RO

only. The Myron L Company assumes no other responsibility

or liability.

E. P

OOL

P

RO

Model

P

OOL

P

RO

Model

PS9

PARAMETERS

Conductivity/MIN/SALT/TDS/Alkalinity/Hardness/LSI/ORPmV/

Free Chlorine Equivalent (FC

E

) ppm/pH/Temperature

Advertising