AltiGen comm 600 - Manual (Page 17)

Alti-IP 600 Manual 7
C H A P T E R 3
Installation
These steps describe procedures for installing and configuring the Alti-IP
600 locally — through manual setup or plug and play. To install and
configure the phone remotely, refer to “Remote Installation” on page 15.
Manual Setup
To manually set up the Alti-IP 600 phone, perform the following steps:
1. Network Setup
Find out the settings for the following (this information will be needed
later to configure the Alti-IP 600):
• AltiWare Server IP Address
• DHCP - if DHCP is not used, obtain the Alti-IP 600 phone’s IP
address from the System Administrator.
• Gatekeeper Auto Discovery - if gatekeeper auto discover is not
used, obtain the AltiWare IP address.
• Firewall - Refer to “Firewall Considerations” on page 36.
2. AltiAdmin/ACM Admin Setup - AltiGen IP Phone Configuration
Window
To configure the Alti-IP 600 phone with AltiAdmin/ACM Admin,
select AltiGen IP Phone Configuration from the Management
menu.