Operation notes – AltiGen comm 600 User Manual
Page 29
Alti-IP 600 Manual
19
•
If the Alti-IP 600 is configured for a public IP address, you can call
other public IP address devices.
If the Alti-IP 600 is configured for a private IP address, you can call other
private IP address devices that you can “see” or that are on your subnet.
Operation Notes
•
The Alti-IP 600 does not work with TAPI as the source phone (caller).
•
When using #26 and #27 to log out/in, the Alti-IP 600 must be onhook.
Using the speaker button to use #26 or #27 will not work.
•
Two dial tones are always heard when going offhook on the Alti-IP
600.
•
If two calls ring into the Alti-IP 600 at the same time and the user
attempts to answer the second call, the IP phone will automatically
connect the user to the first call.
•
The user should reboot the Alti-IP 600 after disconnecting the LAN
cable to the phone.
•
The user should reboot the Alti-IP 600 after changing the IP address or
DHCP setting.
•
If the Alti-IP 600 is configured for a public IP address, you can call
other public IP address devices.
•
If the Alti-IP 600 is configured for a private IP address, you can call
other private IP address devices that you can “see” or that are on your
subnet.
•
The daisy chaining of Alti-IP 600 phones is not supported.