AltiGen comm 600 - Manual (Page 41)

Alti-IP 600 Manual 31
C H A P T E R 5
Phone Functions
The Alti-IP 600 provides a broad range of call handling and dialing features
directly on the phone and through the AltiWare system. The following
section lists the supported telephony features, a brief description and
additional configuration notes where applicable.
Feature Description Configuration Notes
Auto Answer When a call comes in, the
IP phone will ring for a
specified number of
seconds, connect the call,
and automatically answer
through the speaker or
headset. • Press * * 6 ENTER, scroll to
enable/disable Auto Answer
Mode, set number of seconds to
ring before answering (1 - 20),
and select from speaker or
headset as the Auto Answer
device.
• During ringing, the user can
manually pick up the call from
headset, handset or speaker.
Busy Lamp
Field (BLF) Associates Soft Key with
an extension that can be
automatically dialed when
selected; the
corresponding button
light indicates that the
extension is busy and
blinks when ringing.
The BLF ring tone is only
played when the phone is
idle state. It is stopped
when the destination
phone stops ringing or the
local phone exits idle
state.
When multiple BLF
extensions ring
simultaneously, the IP
phone will play the first
BLF extension ringer and
beep tones and ignore
other BLF extensions.
• From AltiAdmin/ACM Admin,
go to AltiGen IP Phone
Configuration on the
Management Menu, go to the
desired extension, and set the
appropriate function key to BLF
and enter the extension in the field
below. Select the Play Beep Tone
checkbox to have the IP Phone
play an audible beep or one of six
different ring tones when the
extension is ringing.
• The BLF Feature can only be
assigned to internal extension
number, not outside numbers.
• The feature is not available in
Basic Mode.