AltiGen comm 600 - Manual (Page 44)

Alti-IP 600 Manual 34
Ring Tones Select from one of three
ring tones. • Press * * 6 ENTER, scroll to
SELECT RING , and select from 0
- 2.
Soft Keys
1 - 10
Quickly performs a
specified function (Busy
Lamp Field, AltiServ
Feature Code, Phone
Setting or Speed Dial)
previously configured by
the System Administrator.
(Soft key #6 is configured
as FLASH by default. All
other soft keys are set to
Phone Setting by default.) • In AltiAdmin, go to Extension
Configuration >Station Speed
and enter the Speed Dial entries
for the appropriate extension(s).
Then, go to AltiGen IP Phone
Configuration on the
Management Menu, go to the
desired extension, and set the
appropriate soft key to the desired
function (BLF, Feature Code,
Phone Setting, Speed Dial).
Speaker Enables use of speaker
phone. • Feature does not require special
configuration to work.
Speed Dial Quickly dials a specified
number that has been
previously stored. • In AltiAdmin, go to Extension
Configuration >Station Speed
and enter the Speed Dial entries
for the appropriate extension(s).
Then, go to AltiGen IP Phone
Configuration on the the
Management Menu, go to the
desired extension, and set the
appropriate function key to Speed
Dial and enter the speed dial code
in the field below.
Transfer
(XSFR)
Transfers an active call to
another number. • Feature does not require special
configuration to work.
• You cannot use this button to
“flash” after using it to transfer a
call. If you want to reconnect to a
call after using the XSFR button,
you must use the $(BACK key).
Voice Mail
(VM)
Enables access to voice
messages. • The VM count that appears in the
LCD displays new messages
(previously heard messages are not
included).