AltiGen comm 600 - Manual (Page 39)

Alti-IP 600 Manual 29
Network, then press the ENTER button.
This feature can be enabled or disabled through the Display Workgroup Status
check box in the AltiGen IP Phone Configuration Page in AltiAdmin/ACM Admin,
Activity Display
When the Alti-IP 600 user calls an extension in the system which has
Activity codes set up, if the call goes into RNA handling or the destination
user has DND enabled, the Activity code is displayed on the IP phone.
Note: This feature is not available in Basic Mode. Also, the activity
displayed on the IP phone may truncate the caller ID/caller name.