Updating phone firmware – AltiGen comm 600 User Manual
Page 35
Alti-IP 600 Manual
25
5.
Use the buttons on the dial pad to enter the new TFTP server address,
using the * key to enter periods. Use the $(BACK key) to correct any
mistakes.
6.
Press the ENTER button.
Updating Phone Firmware
Note:
If using TFTP Server Application, TFTPD32, included in the CD-
ROM, copy the following files —
tftpd32.exe
and <
hlp
>
files —to your local directory; once copied, you can launch the
TFTP Server application from the executable file.
Obtain
app_mid.bin
and
dsp.bin
files from the AltiGen
website and copy to your local directory.
Important:
When updating the Alti-IP 600 phone’s firmware, it is
recommended that administrators perform any updates after
normal business hours or when the IP phone is not in use. If the
Alti-IP 600 phone is in use during an update, the call will be
disconnected.
You must have a TFTP server to have the Alti-IP 600 to connect to in order
update the firmware.
If the Alti-IP 600 phone is registered with AltiServ, to update the phone
firmware from AltiAdmin:
1.
Launch IP Phone Configuration in AltiAdmin Main Menu.
2.
Set TFTP Server address.
3.
Select Boot Download and Reset IP Phone check boxes, then click
Apply.
4.
The Alti-IP 600H/600PH should reboot and download image from the
specified TFTP server.
To update the phone firmware directly from the Alti-IP 600 Phone:
1.
Press * * 7, then press the ENTER button to access the Configuration
Menu.
2.
Use !/"to scroll to
System
>
TFTP Server.
3.
Enter TFTP server address.
4.
The Alti-IP 600 will download the firmware from the TFTP on the next
reboot.