AltiGen comm 600 - Manual (Page 52)

User Reference
42 Alti-IP 600 Manual
Conference* During a call:
1) Press CONF button (this automatically selects a new line
and places the other party on hold)
2) Enter target telephone number
3) When the call connects, press CONF button again OR
$ (BACK key) to cancel conference and return back to original
party.
• The number of parties allowed in a conference call
depends on the AltiServ system. In general, up to 6 parties
are allowed.
Configuration
Menu* 1) Press * * 7, then ENTER button.
2) Use the navigation buttons to select configuration menu.
• ! / " (UP/DOWN keys) allows you to scroll through text and
select features displayed in LCD screen.
• # (FORWARD key) is for menu selection.
• $ (BACK key) returns to previous configuration menu or
deletes the last digit input.
3) Press ENTER button to access selected menu setting
Handset/
Headset/
Speaker To switch between handset, headset and speaker, the user can
go offhook, press the Speaker button or press the Headset
button (#10 soft key)
Hold* During a call:
1) Press HOLD button to put current call on hold and make a
new call.
To retrieve a single call on hold:
1) Press HOLD button
To retrieve multiple calls on hold:
1) Use ! / " to select a hold call to be retrieved.
2) Press ENTER button
OR
1) Press HOLD button to retrieve last hold call.
Intercom* Incoming Intercom:
Incoming voice path is heard through the speaker, indicated by
the button’s blinking indicator light
Outgoing Intercom:
1) Press ICOM button + <EXT>