AltiGen comm 600 - Manual (Page 9)

Alti-IP 600H/600PH Manual vii
Preface: About This Manual
This document provides the required steps to get the Alti-IP 600 phone up
and running on a Voice over IP (VoIP) network. For complete and detailed
information on procedures that you need to perform on AltiGen’s AltiWare
application or other network devices, refer to the AltiWare OE System
Installation and Administration Manual or AltiContact Manager System
Administration Manual.
Another document, the Alti-IP 600 Quick Reference Card, covers basic end
user phone features and AltiServ functions such as call handling, voice
mail, and web interface.
This guide contains the following chapters and appendices:
Chapter 1, An Overview of the Alti-IP 600, provides an overview and
description of the Alti-IP 600.
Chapter 2, System and Network Requirements describes configuration
requirements.
Chapter 3, Installation, describes how to properly install the Alti-IP 600,
how to configure network settings, and operation notes.
Chapter 4, Configuration, describes how to configure phone settings for
the Alti-IP 600.
Chapter 5, Phone Functions, provides on overview of the Alti-IP 600
basic functions.
Appendix A, provides phone specifications, tips for troubleshooting the
Alti-IP 600, LCD message information and user reference
information.
Glossary
Index
Overview
The Alti-IP 600 Administration Manual provides information about how to
set up, connect cables to, and configure an Alti-IP 600 phone. It also
provides information on how to configure the network and IP settings, and
how to change the settings and options of the Alti-IP 600 phone. The
administrator guide also includes reference information such as IP phone
call flows and compliance information.