AltiGen comm 600 - Manual (Page 32)

Alti-IP 600 Manual 22
Network Settings
TFTP Server System>TFTP Server
{Save TFTP Server IP
Address}
Sets the TFTP server IP address for
updating firmware.
Boot
Download System>Boot
Download
After firmware image upgrade,
submenu changes to {No}. Used
mainly for upgrading or
troubleshooting. On the next boot,
the phone will download the new
firmware from the TFTP server, if
set to [YES].
Note: Make sure to launch
TFTP32.exe.
When downloading, the
phone key pad is disabled.
Version
Information System>Version
Info {Read only, version
information}
Indicates the version number of the
IP Phone.
Setting Menu Path {Sub Menu} Description
Enable DHCP Network>Enable
DHCP
Set YES or NO to indicate whether
Dynamic Host Configuration
Protocol (DHCP) is being used by the
IP phone to retrieve new IP address
upon boot up.
Local
Address Network>Local
Address
Sets the IP phone’s local address;
only shows if DHCP is disabled.
Network
Mask Network>Network
Mask
Sets the IP phone’s network mask;
only shows if DHCP is disabled.
Gateway Network>Gateway Sets the Gateway IP address.
Enable
Gatekeeper Network>Enable/
Disable
GateKeeper
Set whether GateKeeper is enabled or
disabled.