Anritsu S251B - Manual (Page 72)

Step 23. Press the BOTTOM soft key and enter 9, 0 – using the keypad or Up/Down ar-
row key. Press ENTER to set the bottom scale to –90.
Observe the display of amplifier gain performance (Figure 4-22).
NOTE:
Alternatively, press the AUTO SCALE key to set the top and bottom display
scale.
Step 24. Press the MARKER key to display the marker value.
NOTE:
Refer to page 4-4 for instructions on saving and recalling a setup or display.
4-26
Chapter 4 Measurements
Figure 4-22. Measurement Display of Amplifier Gain