Pioneer MEP-7000 - Manual (Page 17)

CONNECTIONS
17
En
English
5. Connecting a computer
Make these connections in order to use the accessory DJS or other DJ software program.
6. Connecting the power cord
When all other connections have been completed, connect one end of the accessory power cord to the AC IN jack on the rear side of
the drive unit, and the other end to a normal AC power outlet, or the auxiliary power outlet of an amplifier.
NOTE
• Use only the furnished accessory USB cable.
Drive unit
Computer
Accessory
USB cable Do not connect until you have installed the required driver
in your computer. See “ABOUT THE DRIVER PROGRAM”
(P.49).
MEP-7000_WY_EN.book 17 ページ ２００９年２月１２日 木曜日 午後８時２１分