4 select [pc] on the browse screen, 5 press load a (or b) button, 6 use the controller to operate the dj software – Pioneer MEP-7000 User Manual
Page 54: Control using “manipulator style, 1 connect to the computer, 2 start the dj software program, Using dj software
USING DJ SOFTWARE
54
En
4
Select [PC] on the BROWSE screen.
Once the DJ software starts, the center display’s BROWSE
screen will show the computer control status, allowing the
rotary selector dial, select up (
) and down () buttons to be
used to operate the DJ software.
For DJS:
The center display will show the DJS BROWSE screen. For
details of actual operation, consult the section “Selecting DJS
Music Tracks” in the chapter on “Normal Style” operation of
the MEP-7000 DJS Control Guide (PDF file on accessory CD-
ROM).
5
Press LOAD A (or B) button.
When the LOAD A (or LOAD B) button is pressed while [PC] is
selected on the BROWSE screen’s source selector, the DJ
software’s track will be set in the controller corresponding to
the LOAD button pressed (A or B). During DJ software
operation, the controller appears highlighted in the BROWSE
screen.
At the same time, the display A/B displays “PC”.
For DJS:
The display A/B displays “DJS”.
6
Use the controller to operate the DJ software.
Use the various buttons, jog dial, and TEMPO adjust slider to
operate the DJ software.
7
To switch to playback of disc or tracks on USB storage device
While controller A (or B) is controlling the computer, if a track
on disc or USB storage device is selected on the BROWSE
screen and the LOAD A (or LOAD B) button is pressed,
playback and control will switch to the selected track on disc
or USB storage device.
Control using “Manipulator Style”
1
Connect to the computer.
The center display will show the [PRO DJ] logo.
2
Start the DJ software program.
When communication is established with the DJ software, the
buttons, jog dial, and TEMPO adjust slider can be used to
control operation, and the MEP-7000’s center display, and
displays A/B will show the currently playing track’s time data
and title, together with the name of artist.
MEMO
• When using the accessory DJS software and certain other DJ
software programs, the MEP-7000’s center display, and
displays A/B will show the currently playing track’s time data
and title, together with the name of artist.
• By designating the MEP-7000 as an audio output device in the
DJ software, tracks played with the DJ software can be output
from the drive unit.
MEMO
• Some DJ software programs do not support the
aforementioned track information displays.
MEP-7000_WY_EN.book 54 ページ ２００９年２月１２日 木曜日 午後８時２１分