Using the utility, Setting method, Settings – Pioneer MEP-7000 User Manual
Page 60: Setting method settings
USING THE UTILITY
60
En
USING THE UTILITY
When the UTILITY button is pressed, the UTILITY screen appears, allowing setting of various device parameters, creation of libraries, and
backup of user data.
SETTING METHOD
1
Use the function buttons to select the item you wish to set
[DISPLAY/CD-G/PC/BROWSE/LANGUAGE/GENERAL].
2
Rotate the rotary selector dial to align the cursor with the
desired setting item.
3
Press either the select down (
) button or the rotary selector
dial to move the
icon to the right side.
4
Turn the rotary selector dial to select the desired setting
value.
5
Press the rotary selector dial to confirm the new setting
value.
To cancel before confirming, press the select up (
) button.
SETTINGS
[1] DISPLAY
Brightness, external output settings, etc.
*1 Screen saver operation
• The screensaver operates when five minutes have passed
without a track being loaded in either controller.
• The screensaver also operates after 100 minutes passes
without any button input when either one or both of the
controllers is in pause mode (including cue standby or END
display).
• Screensaver operation can be set for either normal style or
manipulator style connection.
• The screen saver is disabled when a track is set with DJ
software other than DJS.
• During operation of the screensaver, pressing a button,
inserting a disc, or performing any other command
operation will cancel the screensaver.
[2] CD-G
The CD-G karaoke mode can be selected (P. 59).
[3] PC
The MIDI channel can be set (P. 56).
Select down ( ) button
Rotary selector dial
UTILITY
Function buttons
Factory
default setting
LCD BRIGHTNESS Sets brightness of center
display (5 steps)
5
OEL BRIGHTNESS Sets brightness of displays A/
B (5 steps)
5
LED BRIGHTNESS Sets brightness of LED (5
steps)
5
SCREEN SAVE
*1
After the set time without
user operation, the LCD and
OEL screens are dimmed in
order to preserve the
displays.
ON
TV STANDARD
Sets signal format for
monitor output (PAL, NTSC
(7.5 IRE), NTSC (0 IRE)).
PAL
MONITOR OUT
Sets center display aspect
ratio to LETTER BOX,
FULL SCALE, or OFF.
OFF
MEP-7000_WY_EN.book 60 ページ ２００９年２月１２日 木曜日 午後８時２１分