Pioneer MEP-7000 - Manual (Page 32)

START PLAYBACK (Using normal connections)
32
En
USING THE PLAYLIST
This unit allows the user to prerecord desired tracks in a playlist,
thus allowing quick track selection even when using large-
capacity discs and USB storage devices.
Up to 20 playlists can be constructed, and each playlist can record
up to 150 tracks from multiple USB storage devices and CD-ROM/
DVD-ROM discs.
 Playlist display composition
Playlist listing
When the [PLAYLIST] function button is pressed, a listing of
playlists is displayed. By using the rotary selector dial, a desired
playlist can be selected. The playlist indicated by an orange icon
has been selected for mixing (P. 42).
Also, if a playlist is selected and the rotary selector dial is held
depressed for one second or more, the playlist menu will appear in
the right window.
When a Playlist is Open
Tracks recorded in a playlist are given consecutive numbers and
displayed with title and artist names. When no title is present, the
file name is displayed.
When a track’s original storage device (USB memory, CD-ROM/
DVD-ROM, etc.) is not currently connected, that track’s name is
grayed out on the display.
Also, if a track is selected and the rotary selector dial is pressed,
the track menu will appear in the right window.
 To record tracks in a playlist
1
Use the cursor to select tracks or folders in a USB storage
device or CD-ROM/DVD-ROM disc.
2 Hold the rotary selector dial depressed for one second or
more.
• The cursor will flash, and the track will be recorded in the
currently open playlist.
• The maximum number of tracks recordable in a single
playlist is 150.
• When entire folders are recorded additional time may be
required.
• The [PLAYLIST] icon will flash during recording of tracks to
the playlist. A playlist cannot be opened when the tab is
flashing.
 Play a track from the playlist
1
Open playlist.
2 Use the rotary selector dial to select a track, then press the
LOAD A or LOAD B button.
• Tracks will playback in consecutive numerical order.
• New tracks can be registered and edited on the playlist even
while another track is playing from the list.
MEMO
• Music CD (CD-DA) tracks and DJ software tracks (including
DJS) cannot be recorded on a playlist.
• Once recorded, a playlist remains in memory even when the
power is turned off, so that it can be reused later.
• When a track is recorded on a playlist from a USB storage
device, the playlist information is written to the storage device
itself.
1 Playlist name
2 Consecutive number
3 Title
4 Artist name
NOTE
• If the connected USB storage device does not have
sufficient open space, it may be impossible to record the
contents of tracks on the device.
2
1 3 4
MEP-7000_WY_EN.book 32 ページ ２００９年２月１２日 木曜日 午後８時２１分