Pioneer MEP-7000 - Manual (Page 56)

USING DJ SOFTWARE
56
En
At the same time, the display A/B displays “PC”.
6 Use the controller to operate the DJ software.
Use the various buttons, jog dial, and TEMPO adjust slider to
operate the DJ software.
7 To switch to playback of disc or tracks on USB storage device
While controller A (or B) is controlling the computer, if a track
on disc or USB storage device is selected on the BROWSE
screen and the LOAD A (or LOAD B) button is pressed,
playback and control will switch to the selected track on disc
or USB storage device.
 Control using “Manipulator Style”
1
Connect to the computer.
The center display will show the [PRO DJ] logo.
2 Start the DJ software program.
When communication is established with the DJ program, the
MEP-7000 operates as a MIDI controller, and the status of
controller A/B and center display section’s buttons and
controls are output as MIDI messages.
 Setting a MIDI channel
MIDI channel setting can be performed from the UTILITY screen.
1
Press the UTILITY button.
2 Press the [PC] function button.
The center display will show the MIDI channel setting menu.
• Controller A uses the same channel as the center display,
while controller B uses a different channel. (Factory defaults
are for Controller A and center display to be set to Channel
1, and Controller B set to Channel 2).
3 Either press the rotary selector dial, or press the select down
(
) button.
The icon will move to the right.
4 Turn the rotary selector dial to change the value.
Values between 1 and 16 can be set.
5 Press the rotary selector dial to confirm the value selected.
• Press the select up (
) button to cancel the selection and
return to the UTILITY screen.
MEMO
• By designating the MEP-7000 as an audio output device in the
DJ software, tracks played with the DJ program can be output
from the drive unit.
MEMO
• While the UTILITY screen is being displayed on the center
display, the center display’s MIDI messages are not output.
MEP-7000_WY_EN.book 56 ページ ２００９年２月１２日 木曜日 午後８時２１分