Pioneer MEP-7000 - Manual (Page 7)

FEATURES
7
En
English
CD-G KARAOKE
CD-G discs can be played for easy karaoke performances. The
karaoke image can also be output to large external monitors.
TEMPO CONTROL
High-performance 60 mm slider allows free modification of
track speed.
The digital readout in units of 0.02 % (±6 % range only) makes
possible more accurate and simpler tempo synchronization.
TEMPO CONTROL RANGE
Four greater ease of use, the maximum variable range can be set
to four levels, ±6 %, ±10 %, ±16 %, and WIDE (WIDE is limited to
music CD (CD-DA) only).
MASTER TEMPO
Changes music tempo without changing pitch.
CUE
BACK CUE
After storing the Cue point in memory, press the CUE button while
playing the unit to go back to the Cue point and start over.
CUE/LOOP MEMORY
Cue points and loop points can be stored in the internal memory,
and called up as required.
AUTO CUE
Auto cue automatically locates the track’s start point even if it
differs from the track’s frame, allowing the player to start instantly
at a press of the play/pause (
) button.
CUE POINT SAMPLER
The sound from the memorized cue point can be reproduced by
one touch, which can be used as the start point check and the
sampler.
REAL TIME SEAMLESS LOOP
This function simplifies setting and releasing loops. This function
lets you set a loop while you are playing a track. A loop can also be
set at the end of the track so that the track does not stop. In
addition, an ADJUST mode has been added to enable one-touch
adjustment to the Loop-out point and facilitate loop operation.
HOT LOOP
During loop play, pressing the IN/CUE/HOT LOOP button causes
playback to instantly return to the loop-in point and once again
begin playback from that point. By using this function in sync with
the track’s rhythm, a variety of new play scenarios becomes
possible.
RELOOP
Allows you to replay a loop any number of times.
Press the RELOOP/EXIT button after releasing loop play to return
to the loop start point. Clever use of on and off in combination with
the rhythm make it possible to create new sound effects.
PLAYING ADDRESS
This bar graph provides a visual representation of track playback
progress that enables you to see current playback position just like
you can on an analog record by checking needle position. The
length of the bar shows current position and a flashing bar
provides advance notice of track end.
SLOT IN
Discs are loaded directly without opening doors or trays, making
track selection that much faster.
FADER START
When connected to a Pioneer DJ Mixer, the mixer's fader control
can be used to perform quick start and back cue operations.
CD-TEXT
When a music CD (CD-DA) is played that supports CD-TEXT, the
title, artist, and album text information recorded on that disc can
be utilized.
LEGATO LINK
Equipped with “Legato Link Conversion” function. When playing
music CDs, this function reproduces the 20 kHz+ treble region
lost in the CD format, thus producing high-fidelity sound
approaching that of analog record turntables.
VIBRATION RESISTANT
Equipped with “shock-proof memory” and the same floating
mechanism featured in Pioneer’s Carrozzeria car audio series, for
superb vibration resistance that withstands sound skips.
MEP-7000_WY_EN.book 7 ページ ２００９年２月１２日 木曜日 午後８時２１分