Pioneer AVIC-X3-II - Manual (Page 100)

p Depending on the mobile phones featur-
ing Bluetooth technology, this indicator
may not show on the screen.
5 Missed call notice indicator
6 Preset list display
p This navigation system’s phone call re-
ception is always on standby when the
ignition switch is set to ACC or ON.
p The line-of-sight distance between this
navigation system and your mobile
phone must be 10 meters or less when
sending and receiving voice and data
via Bluetooth technology. However, the
transmission distance may become
shorter than the estimated distance, de-
pending on the environment in use.
p When BT-TEL is selected as a source,
equaliser curves are automatically chan-
ged to suitable settings for the phone
source. When the source is changed or
returned to another source, equaliser
settings automatically return to the ori-
ginal settings.
p When BT-TEL is selected as a source,
functions other than FAD/BAL are inop-
erable in Sound menu.
About the telephone source
standby mode
Once connected via Bluetooth wireless tech-
nology, this navigation system will remain on
telephone source standby in the background
while the connection is sustained. This means
you can freely use the other functions of this
system but still be ready to receive a call.
Setting up for hands-free phoning
Before you can use the hands-free phoning
function you will need to set up the navigation
system for use with your mobile phone. This
entails establishing a Bluetooth wireless con-
nection between the system and your phone,
registering your phone with the system and
adjusting the volume level.
1 Connection
Your phone should already be temporarily con-
nected. However, to make best use of the func-
tions, we recommend you register the phone
to the navigation system.
= For details, refer to Connecting a mobile
phone on page 104.
2 Registration
Register the phone to take full advantage of
the features available with Bluetooth wireless
technology.
= For details, refer to Registering your mobile
phone on page 106.
3 Adjust the volume level
Adjust the volume on your mobile phone and
the navigation system for comfort.
p The caller’s voice volume and ring volume
may vary depending on the type of the mo-
bile phone.
p If the difference between the ring volume
and caller
’s voice volume is large, the over-
all volume level may become unstable.
p Before disconnecting mobile phone from
this navigation system, make sure to adjust
the volume to a proper level.
Making a call by entering
phone number
The most basic way to make a call is to simply
dial the number.
1 Touch [BT-TEL] in AV Source screen to
select the mobile phone source.
= For details, refer to Selecting an AV source
on page 35.
2 Touch [Direct].
The direct dial screen appears.
3 Touch the number keys to enter the
phone number.
The input phone number is displayed below
the device name.
Using the AV Source (Pioneer AV Equipment)
Engb
100
Chapter
08