Selecting the radio station 65, Editing the navigation utilities, Selecting the radio station – Pioneer AVIC-X3-II User Manual

Page 65

Advertising
background image

5

Touch [Back].

Selecting the radio station

The RDS-Tuner of the navigation system auto-
matically tunes to the radio station to receive
available traffic information (RDS-TMC sta-
tion). If reception is poor, you can switch to an-
other station manually. Once the received
radio station is selected, the system automati-
cally tunes to stations that provide traffic infor-
mation according to the location of the
vehicle.

Tuning to a RDS-TMC station with
good reception

1

Touch [Traffic/Info] in NAVI MENU, then

touch [Manual Station Search].

2

Touch [Next].

Available radio stations can be searched auto-
matically. If a radio station with good reception
is found, the tuning mode is stopped.

Store:
Store the current RDS-TMC station in the pre-
set list. If there are already five stations stored
in the list, select one to be overwritten.

p If you want to continue to search for an-

other station, repeat this procedure.

3

Touch [OK].

Switches to the selected RDS-TMC station and
returns to the Information menu.

Selecting from pre-registered RDS-
TMC stations

You can pre-select up to five RDS-TMC stations
(Preset Stations). From the list of the RDS-TMC

stations, you can select the one you want to re-
ceive.

1

Touch [Traffic/Info] in NAVI MENU, then

touch [Manual Station Search].
The list of registered RDS-TMC stations ap-
pears. This list of broadcasting stations (Preset
Stations) cannot be used unless those broad-
casting stations have been stored.

2

Select a radio station on the list.

The currently selected RDS-TMC station

Switching to the selected RDS-TMC station.

Editing the Navigation Utilities

Engb

65

Chapter

05

Editing

the

Navigation

Utilities

Advertising