Switching the auto aerial setting 127, Setting the illumination colour 127, Setting the screen colour 127 – Pioneer AVIC-X3-II User Manual

Page 127: Changing the wide screen mode, Customising the av source setting, Switching the auto aerial setting, Setting the illumination colour, Setting the screen colour

Advertising
background image

Switching the auto aerial setting

If the blue lead of the navigation system is
connected to the auto aerial of the vehicle, se-
lect either of the following settings:

! Radio — Extends the aerial only for the

Radio source. The aerial is stored when the
source is switched to another source.

! Power — Extends the aerial when the igni-

tion switch is turned on. The aerial is stored
when the ignition switch is turned off.

% Touch [Antenna Control] in System
menu.
Touching [

Antenna Control] switches be-

tween [

Radio] and [Power].

p Regardless of whether [Radio] or [Power]

is selected, turning off the ignition switch
will cause the aerial to automatically re-
tract.

Setting the illumination colour

The illumination colour can be selected

Blue

or

Red.

1

Touch [Illumi Color] in System menu.

2

Touch desired colour.

Setting the screen colour

You can select one of five colours as the
screen colour.

1

Touch [Screen Color] in System menu.

2

Touch desired colour.

! White/Blue/Yellow/Red/Green

Changing the Wide Screen
Mode

CAUTION

For safety reasons, you cannot use some of these
navigation functions while your vehicle is in mo-
tion. To enable these functions, you must stop in

a safe place and apply the handbrake (refer to
Handbrake interlock on page 18).

% Touch [Wide Mode] in System menu to
select the desired setting.
Touch [

Wide Mode] repeatedly to switch be-

tween the following settings:
Full (full)

— Just (just) — Cinema (cinema) —

Zoom (zoom)

— Normal (normal)

! Full (full)

A 4:3 picture is enlarged in the horizontal
direction only, enabling you to enjoy a 4:3
TV picture (normal picture) without any
omissions.

! Just (just)

The picture is enlarged slightly at the centre
and the amount of enlargement increases
horizontally toward the ends of the picture,
enabling you to enjoy a 4:3 picture without
sensing any disparity even on a wide
screen.

! Cinema (cinema)

A picture is enlarged by the same propor-
tion as

Just in the horizontal direction and

by an intermediate proportion between

Full

and

Zoom in the vertical direction; ideal for

a cinema-sized picture (wide screen pic-
ture) where captions lie outside the frame.

! Zoom (zoom)

A 4:3 picture is enlarged in the same pro-
portion both vertically and horizontally;
ideal for a cinema-sized picture (wide
screen picture).

! Normal (normal)

A 4:3 picture is displayed as it is, giving you
no sense of disparity since its proportions
are the same as that of the normal picture.

p Different settings can be memorised for

each video source.

p When video is viewed in a wide screen

mode that does not match its original as-
pect ratio, it may appear differently.

p Remember that use of this system for com-

mercial or public viewing purposes may
constitute an infringement on the author

’s

rights protected by the Copyright Law.

Customising the AV Source Setting

Engb

127

Chapter

09

Customising

the

A

V

Source

Setting

Advertising