Pioneer AVIC-X3-II - Manual (Page 68)

Direction:
Displays the direction your vehicle is travelling
in.
Clock:
Displays the current time.
Adjust Look:
Touch [
Adjust Look] to display a screen for se-
lecting the panel pattern. Touch one of the pat-
terns from among those displayed onscreen to
change the panel to the selected pattern.
p If you touch [Peak Hold Reset], the maxi-
mum and minimum (green line) values in-
dicated in [
Acceleration] and [Side
Acceleration] are reset.
p You cannot change the speedometer at the
centre.
p Selecting Demo Mode in Settings menu
enables you to perform a demonstration
with random values.
Checking the Navigation
Status
The navigation status, including the driving
status of a vehicle, positioning status by satel-
lite, learning status of the 3D sensor and cable
connection status, can be checked.
Checking sensor learning
status and driving status
1 Touch [Settings] in NAVI MENU, then
touch [Hardware Info].
2 Touch [3D Calibration Status].
The 3D Calibration Status screen appears.
4
5 6 7
1
3
2
1 Distance
Driving distance is indicated.
2 Speed Pulse
Total number of speed pulses is indicated.
3 Learning Status
Current driving mode is indicated.
4 Degree of learning
Sensor learning situations for distance ( Dis-
tance), right turn (Right Turn), left turn
(
Left Turn) and 3D detection (3D Detec-
tion) are indicated by the length of bars.
p When tyres have been changed or
chains fitted, turning on the Speed Pulse
allows the system to detect the fact that
the tyre diameter has changed, and auto-
matically replaces the value for calculat-
ing distance.
p If ND-PG1 is connected, the distance cal-
culation value cannot be replaced auto-
matically.
5 Speed
Speed detected by the navigation system is
indicated. (This indication may be different
from the actual speed of your vehicle, so
please do not use this instead of the speed-
ometer of your vehicle.)
6 Acceleration or deceleration/Rotational
speed
Acceleration or deceleration velocity of your
vehicle is indicated. Also, rotational speed
when your vehicle turns to left or right is
shown.
7 Inclination
Degree of slope of the street that you are
currently running is indicated.
To clear values...
If you want to delete the learned results stored
in [
Distance], [Speed Pulse] or [Learning Sta-
tus], touch the relevant result, then touch
[
Clear].
p The navigation system can automatically
use its sensor memory based on the outer
dimensions of the tyres.
Editing the Navigation Utilities
Engb
68
Chapter
05