Pioneer AVIC-X3-II - Manual (Page 50)

3 Touch the point to start scrolling.
1 2 3
You can select the following items:
1 Starting Point
2 Way Point (If this is set)
3 Destination
p If there are multiple way points, selecting
[ Way Point] displays a list of the way points
on the route. Touch the place you want to
start scrolling from.
4 Touch or to scroll the map.
To continue scrolling after you release your fin-
ger, touch and hold
or . If neces-
sary, the scale of the map can be changed.
Current Route
Scroll Cursor
Map:
The scroll screen is displayed.
= For details concerning operations, refer to
When appears to the right of the list on
page 45.
5 Touch [Back].
You can return to the previous display.
Checking the set route by text
This function is not available if your vehicle
has deviated from the set route.
p When [Profile] is selected during the mem-
ory navi mode, information is displayed up
to the location where the route is stored in
memory.
1 Touch [Route Options] in NAVI MENU,
then touch [View Current Route].
p [View Current Route] is active only when
the route is set.
p You can also see the location by touching
on the right of the list.
2 Touch [Profile].
3 Check the contents on the display.
Scroll the list as necessary.
Name of the streets you are driving through
Driving distance
4 Touch [Back].
You can return to the previous display.
p When a long distance route is calculated,
your navigation system may not be able to
list all the roads. (In this case, the remain-
ing roads will be shown in the list as you
drive on.)
Checking the entire route overview
You can check the entire shape of the current
route.
p When [View Current Route] is selected
during the memory navi mode, the informa-
tion is displayed up to the location where
the route is in memory.
1 Touch [Route Options] in NAVI MENU,
then touch [View Current Route].
p [View Current Route] is active only when
the route is set.
Setting a Route to Your Destination
Engb
50
Chapter
04