Pioneer AVIC-X3-II - Manual (Page 35)

Memory navi mode
While the DVD Map Disc is inserted, you can
store the map data into the internal memory
of the navigation system. If the DVD Map Disc
is removed from the navigation system after
storing is completed, navigation is performed
using the data in the memory (memory navi
mode). When
disappears, memory navi
mode is ready. You can now remove the DVD
Map Disc. In the memory navi mode, you can
play a music CD or DVD-Video on the naviga-
tion system while navigation is taking place.
The operation automatically switches to the
memory navi mode when the DVD Map Disc
is removed from the navigation system.
Some functions are restricted and different
from the navigation using the DVD Map Disc
(DVD navi mode). If you want to use these
functions, please insert the DVD Map Disc
again. During the memory navi mode, naviga-
tion is performed only using the data read into
the memory.
p You may need to insert the DVD Map Disc
and store new data in the memory during
navigation operation, such as when the
destination is far away. The memory navi
mode uses the following map data to per-
form navigation.
= Refer to page 143 for more detail in-
formation.
Basic AV Source
This section describes basic AV operations,
such as adjusting the volume, switching the
source and stopping the source, using CD op-
erations as an example.
Selecting an AV source
1 Press VOLUME knob (or AV button) to
switch to the AV operation screen.
2 Press MENU button to change to AV
MENU.
3 Touch the source icon to select the de-
sired source in AV Source screen.
p Also, press VOLUME knob repeatedly when
the AV operation screen is displayed to
switch between sources:
[
DISC] (CD, ROM, DVD-V, DivX (built-in DVD
drive))
— [RADIO] (tuner) — [iPod] (iPod)
— [USB] (USB audio) — [BT-TEL] (Blue-
tooth Telephone)
— [BT-AUDIO] (Bluetooth
Audio)
— [M-CD] (multi-CD player) —
[ M-DVD] (multi-DVD player)
— [AV-1]
(video input1)
— [AV-2] (video input2) —
[ EXT-1] (external unit 1)
— [EXT-2] (external
unit 2)
— [OFF] (source off)
p Touch [OFF] to switch the source to OFF.
p Touch [REAR SCREEN] to select the source
for Rear Display.
p Sources that are not connected to the navi-
gation system, sources that are busy read-
ing a disc or magazine, and sources with
incomplete settings cannot be used.
Basic Operation
Engb
35
Chapter
02
Basic
Operation