Pioneer AVIC-X3-II - Manual (Page 93)

3 Use VOLUME knob to adjust the TA vo-
lume when a traffic announcement begins.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4 Touch [Cancel] while a traffic announce-
ment is being received to cancel the an-
nouncement.
The tuner returns to the original source but re-
mains in standby mode until [
TA] is touched
again.
You can also cancel the announcement by
changing the source or band.
p When the preset list is displayed, TA func-
tion icon will not be displayed.
= For details, refer to Switching between the
detail information display and the preset list
display on page 89.
p The system switches back to the original
source following traffic announcement re-
ception.
p Only TP stations and other enhanced net-
work
’s TP stations are tuned in during seek
tuning or BSM when TA is on.
Using PTY functions
You can tune in a station by using PTY infor-
mation.
Searching for an RDS station by PTY
information
You can search for general types of broadcast-
ing programmes.
= For details, refer to PTY list on page 95.
1 Touch [PTY] in Function menu.
2 Touch c or d to select a programme
type.
There are four programme types:
News&INF
— Popular — Classics — Others
3 Touch [Start] to begin the search.
The tuner searches for a station broadcasting
that programme type.
To cancel the search, touch [
Stop].
p The programme of some stations may differ
from that indicated by the transmitted PTY.
p If no station is broadcasting the type of pro-
gramme you searched for, Not Found is
displayed for about two seconds and then
the tuner returns to the original station.
Using news programme interruption
When a news programme is broadcast from a
PTY code news station, the navigation system
can switch from any station to the news broad-
cast station. When the news programme
ends, reception of the previous programme re-
sumes.
% Touch [News] in Function menu to turn
on news programme interruption.
Touch [
News] until or appears in
the display.
To turn off news programme interruption,
touch [
News] again.
A news programme can be cancelled by
touching [
Cancel].
You can also cancel the news programme by
changing the source or band.
p When the preset list is displayed, NEWS
function icon will not be displayed.
Using the AV Source (Built-in DVD Drive and Radio)
Engb
93
Chapter
07
Using
the
A
V
Source
(Built-in
DVD
Drive
and
Radio)