Pioneer AVIC-X3-II - Manual (Page 138)

Please insert the appropriate
disc. Route calculation was
not possible.
In the memory navi mode, if the
Auto-reroute does not function for
some reason. Insert the DVD Map Disc.
No route data can be stored.
You should insert the disc that
contains the map data of the
current position. The area to be set for [ Map in Mem-
ory] is “areas not stored on the DVD
Map Disc
”.
• Change the memory area to be set to “areas
stored on the DVD Map Disc
”.
• Insert the DVD Map Disc containing that
area.
•Scaling down.
•Scaling up.
In the memory navi mode, if the
DVD Map Disc is inserted without
changing the scale (only when the
point is stored on the DVD Map
Disc). The scale automatically returns to the scale
that was set in the DVD navi mode before
being changed to the memory navi mode.
• No map data available on
this scale. Scaling up.
• No map data available on
this scale. Scaling down. When the scale that had been pre-
viously displayed cannot be dis-
played for the following reasons:
• The disc was ejected and the sys-
tem was changed to the memory
navi mode.
• In the memory navi mode, the
map was scrolled to outside the
memory area. Or, the vehicle moved
outside of the memory area.
• The map was scrolled to areas not
stored on the DVD Map Disc. Or, the
vehicle moved to unrecorded areas.
• The map was scrolled from unrec-
orded areas to the memory area. Or,
the vehicle moved from unrecorded
areas to the memory area. If the desired scale cannot be selected, insert
the DVD Map Disc that contains that area
and then change the scale.
Failure in the memory recov-
ery process. Memory naviga-
tion is presently not possible. Failed to complete the recovery of
the memory area because the disc
could not be read for some reason,
resulting in deletion of the memory.
• Clean the disc.
• Clean the DVD drive.
• Consult the Pioneer Local dealer if this mes-
sage persists.
The map data could not be
stored. Previous setting will
be kept. Recovery was performed for the
memory area after failing to read
the disc data for some reason (the
memory area that was previously
set will be recovered).
• Clean the disc.
• Clean the DVD drive.
• Consult the Pioneer Local dealer if this mes-
sage persists.
This function is not available
with the current map disc. The current position is “areas not
stored on the DVD Map Disc
” and
an attempt was made to zoom in to
make the scale 500 m or more.
Zoom in again after the vehicle moves into an
area stored on the DVD Map Disc.
Or, replace the DVD Map Disc and try to
zoom in again.
Failed to save to memory.
Please re-enter setting. The settings could not be saved for
some reason. • Retry.
• Consult the Pioneer Local dealer if this mes-
sage persists.
Appendix
Engb
138
Appendix