Cautions relating to auto reroute in, Memory navi mode, Tmc icon during the memory navi – Pioneer AVIC-X3-II User Manual

Page 146: Mode, Operation outside the memorised, Area, Positioning technology, Appendix

Advertising
background image

! In memory navi mode, map scale data that

cannot be read in the memory cannot be
displayed. Accordingly, the edge of the
map will appear cut off along the point it
was not read into memory. This simply indi-
cates the edge of the map data, and is not
a malfunction.

! If you keep driving or scrolling the map to a

point where the map can no longer be dis-
played, the scale automatically switches to
a range possible to display. If you would
like to continue driving or scrolling the map
at the same scale, set the DVD Map Disc in
the navigation system.

! You cannot reroute to avoid traffic jam or

closure.

! If you continue to drive outside the route

for a while, you may not be able to perform
map matching.

! If you deviate from the route during mem-

ory navi mode, the set route will be re-
routed, but only to return you to the original
route calculated within the memorised
area.

! Although an enlarged map of the intersec-

tion will be displayed, no special motorway
illustration (illustration of motorway junc-
tions) will be displayed.

Cautions relating to auto
reroute in memory navi mode

Auto rerouting in memory navi mode is de-
signed to return you to your original route
wherever possible.
In memory navi mode, persistently deviating
from the route may result in one of the follow-
ing:

! A clearly circuitous route

! Leaving a toll road and returning to the toll

road from where you left it

In the above case, if the set route seems un-
suitable, insert the DVD Map Disc. Setting the
DVD Map Disc to navigation automatically re-
sets the route from your current location to
your destination.

TMC icon during the memory
navi mode

! TMC-related data for only one country can

be memorised. Therefore, if

appears

on the screen when crossing an interna-
tional border, you will need to insert the
disc to use the RDS-TMC function. Touch-
ing

allows you to check the locations

of the traffic information along the route.
However, you cannot perform rerouting.

Operation outside the
memorised area

When the vehicle leaves the memorised area,
the functions will be limited.

! The auto reroute function does not work.
! You can only display a larger scale map.

The map display will automatically change
to a 50 km (or 100 km) scale.

! The map matching function will not be

available. Therefore, the position of your ve-
hicle may be misaligned.

! The navigation guidance will only be avail-

able when arriving at your destination.
Other guidance is not possible (this in-
cludes no display of direction arrows).

To cancel these limitations, insert the DVD
Map Disc to the navigation system.

Positioning Technology

The navigation system accurately measures
your current location by combining the posi-
tioning by GPS and by Dead Reckoning.

Appendix

Engb

146

Appendix

Advertising