Installing the programme, Select the language from, Installing the – Pioneer AVIC-X3-II User Manual

Page 141: Appendix

Advertising
background image

Installing the Programme

The programme is installed to the navigation
system using the application disc.
This is not necessary if your dealer al-
ready performed the installation.
When installing the programme, you carry out
the following operations. When all the setup
procedures are completed, you can use the
navigation system.

1 Insert the disc while the vehicle is

parked.

j

2 Select the language used for the navi-

gation system.

j

3 Set the time difference.

CAUTION

Once the installation of the programme starts, do
not stop the engine of your vehicle nor switch off
the navigation system until the installation is
completed and the following Map screen with
current position appears.

1

Park your vehicle in a safe place.

Leave the engine on, and make sure that the
handbrake is applied.

2

Insert the Pioneer DVD Map Disc into

the disc loading slot of the navigation sys-
tem.
When the upgraded programme has been
found, installation of the programme starts im-
mediately.

p Do not insert anything other than a disc

into the disc loading slot.

p If you cannot insert a disc completely or if

an inserted disc is not recognised, check
that the label side of the disc is up. Press
EJECT button to eject the disc, and check
the disc for damage before inserting the
disc again.

3

Touch [Yes/Oui/Ja].

When you start the navigation system for the
first time, you will see a confirmation message
asking if you wish to select another language.
English is the default language of the naviga-
tion system. If desired, you can select another
language as shown.

p To keep English, touch [No/Non/Nein].
p When you want to select another language,

touch [

Yes/Oui/Ja], and proceed to the

next step.

4

Select the language from the list.

Touch the language you want to use.

p The language selected here is reflected for

the Navigation functions (e.g., Destination
search, etc.) only.

= Refer to Language Selection in System

Options on page 71.

Installation of the programme begins in the
language that you chose.

When the installation is complete, the opening
display appears.

Appendix

Engb

141

Appendix

Appendix

Advertising