Pioneer AVIC-X3-II - Manual (Page 142)

Some time is needed until navigation is ready.
5 Check the details of the caution mes-
sage and touch [OK].
6 To set the time difference, touch [+] or
[-].
Time difference
The time difference between the time origin-
ally set in the navigation system (Central Eur-
opean Time) and the current location of your
vehicle is shown. If necessary, adjust the time
difference. Touching [
+] or [-] changes the
time difference display in one-hour incre-
ments. The time difference can be set from
+3
to -3 hours.
7 If necessary, set to summer time.
Summer time is off by default. Touch [ Off] to
change the time if you are in the summer time
period. This turns the display below summer
time [
On].
8 To complete the setting, touch [Back].
The map of your surroundings appears.
This completes the setup of your navigation
system. Chapter 2 explains the basic operation
of your navigation system.
= For details, refer to Time on page 74.
Adjusting the Response
Positions of the Touch Panels
(Touch Panel Calibration)
If you feel that the touch panel keys on the
screen deviate from the actual positions that
respond to your touch, adjust the response po-
sitions of the touch panel screen. There are
two adjustment methods: 4-point adjustment,
in which you touch four corners of the screen,
and 16-point adjustment, in which you make
fine-adjustments on the entire screen.
p Make sure to use the supplied stylus for ad-
justment and gently touch the screen. If
you press the touch panel forcefully, the
touch panel may be damaged. Do not use
a sharp pointed tool such as a ballpoint
pen or a mechanical pen. Otherwise the
screen is damaged.
Stylus (supplied with navigation
system)
1 Press VOLUME knob (or AV button) to
switch to the AV operation screen.
Appendix
Engb
142
Appendix