Pioneer AVIC-X3-II - Manual (Page 27)

e Disc loading slot
f Sub display
Displays the current time or information
about the AV source that is currently play-
ing.
g VOLUME knob
Turn to adjust the AV (Audio and Video) vo-
lume or press to change the AV source.
Press and hold
VOLUME knob to switch the
source to mute.
Flow from Startup to
Termination
p If the programme is not installed, see page
141 and install the programme.
1 Start the engine.
The navigation system is also turned on.
After some time, the navigation opening
screen comes on for a few seconds. Then, a
message screen is displayed.
p Insert the Pioneer DVD Map Disc to the
disc loading slot.
2 Check the details of the caution mes-
sage and touch [OK].
You can operate the navigation system by
touching keys displayed on the screen. The
map of your surroundings is displayed.
3 Turn off the vehicle engine.
This navigation system is also turned off.
p This product also can be switched off by
turning the ACC (ignition) OFF.
Inserting/Ejecting a Disc
Inserting a disc
% Insert a disc into the disc loading slot.
p The DVD drive plays one standard 12-cm or
8-cm (single) disc at a time. Do not use an
adapter when playing 8-cm discs.
p Do not insert anything other than a disc
into the disc loading slot.
Ejecting a disc
% Press EJECT button.
The disc is ejected.
Opening and Closing the
LCD panel
CAUTION
! Do not close the LCD panel with hands by
force. This may cause malfunction.
! Keep hands and fingers clear of the display
unit when opening, closing, or adjusting the
LCD panel. Be especially cautious of chil-
dren
’s hands and fingers.
The LCD panel will open or close automatically
by turning the ignition switch on or off. You
can turn off the automatic open/close func-
tion.
p The automatic open/close function will op-
erate the display as follows:
— When the ignition switch is turned OFF
while the LCD panel is open, the LCD
panel will close after a few moments.
Basic Operation
Engb
27
Chapter
02
Basic
Operation