Bay Technical Associates BayStack ARN Routers none - Manual (Page 103)

114200 Rev. A B-1
Appendix B
Using Local Boot (the Quick-Start Procedure)
This appendix explains how to local boot the ARN using the Quick-Start
procedure. The Quick-Start Procedure is the initial configuration that gets a
Bay Networks ARN router up and running on the network. The procedure enables
the Internet Protocol (IP) so that the router can connect to Site Manager.
To power-start the ARN, you run the inst_arn.bat script and enter information at
the prompts. The ARN automatically selects options for some prompts, and you
can accept default values for many of the other prompts.
To aid you in answering Quick-Start prompts, fill out the following worksheets
with assistance from your network administrator. The worksheets contain all the
options that appear at each prompt, and space for you to enter your information.
The last two sections in this appendix, “Using the Quick-Start Commands” and
“Running the Installation Script,” provide additional information about the
Quick-Start procedure.
Be sure to fill out the worksheets and read all sections of this appendix before you
begin the Quick-Start procedure.
Note: Contact your network administrator for assistance in selecting
worksheet options.