Bay Technical Associates BayStack ARN Routers none - Manual (Page 114)

Installing and Operating BayStack ARN Routers
B-12 114200 Rev. A
Enter Remote Address
selection [3]: 1. DCE
2. DTE
3. EXPLICIT
Note: Reverse local and remote
address values when
configuring the device at the
other end of the circuit.
(Exception: When connecting to
a Series 5 router that uses
DCE/DTE addressing, use the
SAME local address value.)
Frame Relay Worksheet
Requested Information Options Your Response
Enter Management type [3]: 1. DLCMI None
2. Rev 1 LMI
3. ANSI T1 617D
4. CCITT Annex A
5. LMI Switch
6. Annex D Switch
7. Annex A Switch
Enter addressing type [4]: 1. ADDR Q.921
2. ADDR Q.922 (MARCH ’90)
3. ADDR Q.922 (NOVEMBER
’90)
4. ADDR Q.922
Enter address field length [2]: 2. Two Bytes
3. Three Bytes
4. Four Bytes
Enter DLCI number [30]:
(For DLCMI None, LMI Switch, Annex
D Switch, and Annex A Switch only)
Enter the permanent virtual
channel (PVC) number.
Note: The valid range for the DLCI
number is between 16 and 1007.
Bay Networks Proprietary PPP Worksheet (continued)
Requested Information Options Your Response