Preparing to install the arn, Verifying shipment contents, Preparing to install the arn -2 – Bay Technical Associates BayStack ARN Routers none User Manual
Page 32: Verifying shipment contents -2
Installing and Operating BayStack ARN Routers
1-2
114200 Rev. A
Preparing to Install the ARN
Verify the following before beginning the installation, as explained in the sections
that follow:
•
Your shipment is complete and undamaged.
•
You have the proper equipment and tools.
•
Your installation site meets physical, electrical, and environmental
requirements.
•
You have the communications devices and the cabling that you need to attach
to the ARN.
Verifying Shipment Contents
We strongly suggest that you inspect all items for shipping damage. If you detect
any damage, do not install the ARN. Call the Bay Networks Technical Response
Center in your area, as described in “About This Guide.”
In addition to the ARN and this manual, your shipping container should contain
several other hardware accessory items. Verify that the items in the shipping
container match those on the packing list.
Refer to the following checklist when verifying the contents of the shipping
container:
__ One power cable for connecting the ARN to a wall outlet.
__ One cable kit (Order No. 110310) for connecting an optional local console or
modem. The console/modem cable kit contains one 15-foot AT standard
molded serial cable (with DB-9 receptacle to DB-25 plug connectors) and one
null modem crossover adapter (with DB-25 to DB-25 receptacle connectors).
__ Two flange brackets and eight #6 flathead screws.
__ Four #10 cagenut screws and washers for rack-mounting the ARN.
__ Four rubber feet (for table-top operation).
Note:
You can find the packing list affixed to the shipping container.