Bay Technical Associates BayStack ARN Routers none - Manual (Page 117)

Using Local Boot (the Quick-Start Procedure)
114200 Rev. A B-15
Running the Quick-Start Script
You run the inst_arn.bat script as part of the Local Boot process.
Begin local boot as follows:
1. At the Technician Interface login: prompt, enter Manager to log in.
2. Enter bconfig config local to configure the router to use the local config
file when booting.
For information about the bconfig command, see “Using the bconfig
Command” in Appendix A.
3. Reboot the router by entering boot .
The Technician Interface login prompt appears.
4. Log in to the Technician Interface.
The Technician Interface mounts the local file system and displays a prompt
indicating the present working directory.
SMDS Worksheet
Requested Information Options Your Response
Enter 10-digit individual address: Enter the individual address
assigned to you by your SMDS
service provider.
Enter 10-digit group address: Enter the group address
assigned to you by your SMDS
service provider.
Enter 10-digit arp address: Enter the Address Resolution
Protocol (ARP) address
assigned to you by your SMDS
service provider.
Note: Make sure that you have the completed worksheets with you.