Figure 1-17. connecting a modem to an arn -25, Table 1-4, External modem parameters -24 – Bay Technical Associates BayStack ARN Routers none User Manual
Page 55: Refer to the modem user guide for instructions, Power off the modem, Installing the baystack advanced remote node, Figure 1-17. connecting a modem to an arn 4, Table 1-4. external modem parameters
Advertising
Installing the BayStack Advanced Remote Node
114200 Rev. A
1-25
Refer to the modem user guide for instructions.
2.
Power off the modem.
3.
Insert the 9-pin receptacle end of the modem cable into the front-panel
console port
.
Figure 1-17.
Connecting a Modem to an ARN
4.
Insert the 25-pin plug at the other end of the modem cable into the
modem RS-232 data communications port
.
Synchronous/Asynchronous Mode
Asynchronous
AutoAnswer
Answer on 2 rings with DTR active.
Local Character Echo
Off
Supervisory Functions
Off
Baud Rate
9600
Data Bits
8
Stop Bits
1
Parity
None
Table 1-4.
External Modem Parameters
(continued)
Modem Signal/Parameter
Value
PHONE
DWR
(LEASE
3810
(LEASED)
3810
NMS
DTE
DIAL
Modem cable
ARN0057A
Redundant Power
Console
UL
UL
100-240~
1.2A
50-60Hz
Advertising