Black Box LRA005A-R2 - Manual (Page 156)

ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL
156
2.1 Interface Addresses
The iface[/frame_type] parameters indicate the interface and frame type. iface is specified as one of the
following, depending on your Router model: eth0, sync0, modem0, modem1, modem2, modem3, or
modem4. If eth0 is selected, the frame_type can be specified as part of the interface, and can be either
802.3, 802.2, SNAP, or II (for Ethernet Type 2). Use a slash to separate the iface from the frame_type, e.g.,
eth0/802.2. If left unspecified, the default frame_type is 802.3.
For the Ethernet interface, the iface parameter is a string of the form eth0/frame_type. For all other
interfaces, iface is of the form modemX. Examples are:
ethN Ethernet N interface, raw 802.3 frame type
ethN/802.3 Ethernet N interface, raw 802.3 frame type
ethN/II Ethernet N interface, Ethernet Type II frame type
ethN/SNAP Ethernet N interface, 802.3 SNAP frame type
ethN/802.2 Ethernet N interface, 802.3 LLC frame type
modem N Modem N interface; modems are numbered from 0 to 4, depending on your
Router model. See the User’s guide for details.
sync0 Synchronous interface (Sync Router only)
2.2 access shift
Displays or changes the primary time clients can access a LAN through the Router
Syntax
access shift shiftstart shiftstop [MTWRFSU]
access shift 0
access shift
Description
The access shift command configures the hours and days of the week clients are allowed to access the
LAN through the Router. The access shift command does not affect LAN-to-LAN operations.
Clients can have individual access times assigned using the client add or client modify commands.
Access to the Router by a client depends upon the access shift assigned, and the access time value (in,
out or both) assigned to the client. A client assigned a value of access time - in will be able to access the
Router during the primary shift. A client assigned a value of access time - out will be able to access the
Router at any time outside the primary shift. A client assigned a value of access time - both will be able to
access the Router at any time (24-hour access).
Subcommands and parameters
access shift shiftstart shiftstop [MTWRFSU]
shiftstart—The time of day the primary shift starts specified in hhmm format using the 24-hour clock.
The default is 0800 or 8:00 a.m.
shiftstop—The time of day the primary shift stops specified in hhmm format using the 24-hour clock.
The default is 1700 or 5:00 p.m. The primary shift hours are the access time for a client with an