Black Box LRA005A-R2 - Manual (Page 237)

ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL
237
Appendix A: System Messages
This appendix contains an alphabetical listing of error and information messages that can appear on
your Router’s serial port console. There are two types of messages: syslog and console. Syslog messages
are generated by the UNIX-style logging system syslog; console messages are generated by the system and
are only generated when there is a console or telnet session active. If your network does not support IP,
syslog messages (sent from the Router) cannot be logged on remote hosts. The messages can be
displayed on the console by using the syslog on command.
NOTE
Important! Because the values of the variables will depend upon your specific network
configuration, host names, parameters selected, etc., all variables contained in
message strings will be shown in italics. Many of the variables also have under_scores
in them.
Syslog messages by group:
• CHAP
• Dialer
• Filter
• Multilink
• IPX
• PAP
• RIP
• SCHAP
• SNMP
• System
Console messages by group:
• ARP
• DIALER
• Filter
• IFCONFIG
• IPFILTER
• IPROUTE
• IPX
• PING
• PPP