Black Box LRA005A-R2 - Manual (Page 34)

ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER USER’S MANUAL
34
1. Using the serial cable provided, connect a PC’s serial port to the console port of the Router. Set the
serial terminal utility to 9600 bps, no parity, 8 data bits, and 1 stop bit.
2. Insert the Router boot diskette in the Router diskette drive.
3. Start the Router.
Typically it takes 2-3 minutes to load the contents of the boot diskette. This is normal. After the
Router finishes starting, the diskette-drive LED will turn off. Do not proceed until this LED turns off.
4. When you see a login prompt, type root and press the RETURN key. When prompted for the
password. press the RETURN key.
5. Proceed to Chapter 5, and begin the software installation process.