Black Box LRA005A-R2 - Manual (Page 198)

ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL
198
the Router’s SAP table.
ping router_name
router_name—The Router to which you wish to verify a connection. This name must appear in
Router’s SAP table.
ping network.node_address
network.node_address—The node address to which you wish to verify a connection.
ping -s {server_name | router_name | network.node_address}
server_name—The server name to which you wish to verify a connection. This name must appear in
the Router’s SAP table.
router_name—The Router to which you wish to verify a connection. This name must appear in
Router’s SAP table.
network.node_address—The node address to which you wish to verify a connection.
ping -s {server_name | router_name | network.node_address} count
server_name—The server name to which you wish to verify a connection. This name must appear in
the Router’s SAP table.
router_name—The Router to which you wish to verify a connection. This name must appear in
Router’s SAP table.
network.node_address—The node address to which you wish to verify a connection.
-s—sends the IPX diagnostic packet continuously.
count—sends the number of IPX diagnostic packets that you specify in count.
3.11 ripfilter
Filter RIP packets using the RIP filter list
Syntax
ripfilter add name { [-i iface [/frame_type]]
[-q query_type]
[-n network] }
-t {allow | deny | nodial}
[-f {inbound | outbound}]
[-o {before | after} existing_name]
[-h {hopcount}]
ripfilter delete name
ripfilter {enable | disable}
ripfilter flush
ripfilter move name [{before | after} existing_name]
ripfilter status
Description