Periodic – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual
Page 154
104
Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Time Range
5
periodic
This command sets the time range for the periodic execution of a command. Use the no form to
remove a previously specified time range.
Syntax
[no] periodic {daily | friday | monday | saturday | sunday | thursday | tuesday | wednesday |
weekdays | weekend} hour minute to {daily | friday | monday | saturday | sunday |
thursday | tuesday | wednesday | weekdays | weekend | hour minute}
daily - Daily
friday - Friday
monday - Monday
saturday - Saturday
sunday - Sunday
thursday - Thursday
tuesday - Tuesday
wednesday - Wednesday
weekdays - Weekdays
weekend - Weekends
hour - Hour in 24-hour format. (Range: 0-23)
minute - Minute. (Range: 0-59)
Default Setting
None
Command Mode
Time Range Configuration
Command Usage
•
If a time range is already configured, you must use the no form of this command to remove the
current entry prior to configuring a new time range.
•
If both an absolute rule and one or more periodic rules are configured for the same time range
(i.e., named entry), that entry will only take effect if the current time is within the absolute time
range and one of the periodic time ranges.
Example
This example configures a time range for the periodic occurrence of an event.
Console(config)#time-range sales
Console(config-time-range)#periodic daily 1 1 to 2 1
Console(config-time-range)#