Displaying the arp inspection log, Figure 215 dis – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual
Page 932
882
Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
ARP Inspection
41
Interface
To display statistics for ARP Inspection:
1. Click Security, ARP Inspection.
2. Select Show Information from the Step list.
3. Select Show Statistics from the Action list.
FIGURE 215
Displaying Statistics for ARP Inspection
Displaying the ARP Inspection Log
Use the Security > ARP Inspection (Show Information - Show Log) page to show information about
entries stored in the log, including the associated VLAN, port, and address components.
CLI References
•
ARP packets dropped by additional
validation (IP)
Count of ARP packets that failed the IP address test.
ARP packets dropped by additional
validation (Dst-MAC)
Count of packets that failed the destination MAC address test.
Total ARP packets processed by ARP
inspection
Count of all ARP packets processed by the ARP Inspection engine.
ARP packets dropped by additional
validation (Src-MAC)
Count of packets that failed the source MAC address test.
ARP packets dropped by ARP ACLs
Count of ARP packets that failed validation against ARP ACL rules.
ARP packets dropped by DHCP
snooping
Count of packets that failed validation against the DHCP Snooping
Binding database.
TABLE 167
ARP Inspection Statistics (Continued)
Parameter
Description